Goldmax One Coat Gypsum Plaster

GOLDMAX ONE COAT GYPSUM PLASTER

GOLDMAX 1 Coat : Gypsum Plaster made for application on almost all backgrounds, e.g. brickwork, block work or concrete, suitable for application like GYPSUM/POP/ punning (over Sand & Cement Plaster), bull marks, level strips, etc. It has special additives for enhanced setting time helps in controlling the onsite wastages. It provides perfectly lined and leveled surface providing a perfectly flat surface ready for painting.

PRODUCTFEATURE

  • No Shrinkage Crake
  • Zero Maintenance
  • Very Smooth Finishing
  • No Water Curing Required
  • Single Cost Application
  • Light Waight Gypsum Plaster
  • Seves Time
  • High Strength
  • Can Be Apply All Surfaces/RCC/BLOCK/Bricks
  • Zero Wastage
  • Extra White

GOLDMAX 1 COAT GYPSUM PLASTER FOR PRE-TREATMENTS OF VERY STRENGTH AND SMOOTH BACKGROUND.

GOLDMAX GYPSUM APPLICATION METHOD

  • Right Angle
  • Bull Marking
  • Line Leveling
  • Easy Apply The Single Cost GYPSUM
  • Very Nice Finishing
  • Extra White

GOLDMAX 1 COAT GYPSUM ADVANTAGE

  • GOLDMAX GYPSUM : Non-combustible (when tested in accordance with TYPE-A, BS: 477: Part 1:1976), Therefore a good form of all Surfaces. thermal protection to the building structure.
  • Extra Whiteness, With More Coverage. With High Strength.
  • GM- With improved Thermal resistance properties. (Thermal Resistance R = 0.08m²K/W at 12mm thickness
  • GOLDMAX 1 COAT GYPSUM : Can Be Apply All Surfaces/RCC/BLOCK/Bricks/all

GOLDMAX ONE COAT GYPSUM PLASTER

AN ISO 9001:2015 Certified Company

GOLDMAX 1 COAT GYPSUM PLASTER : Technical & Physical Paramete

  • DRY BULK DENSITY 
  • WET BULK DENSITY
  • WATER TO POWDER RETIO
  • SETTING TIME INITIAL
  • SETTING TIME FINAL
  • 700 Kg/m3 (Max)
  • 1.3-1.5 g/cm3
  • 12:01:020
  • 10-13 MIN
  • 18-23 MIN

GOLDMAX ONE COAT GYPSUM PLASTER

Goldmax 1 Cost Gypsum Chemical Composition : Calcium Sulphate Hemihydrate: CaS04. ½ H2O

Drying Type : Normal Setting

GOLDMAX 1 Coat Gypsum Plaster ( Identification & Packing ) : GOLDMAX 1 COST GYPSUM PLASTER : is packed in PP bags. The outer layer of the bag is printed with the aaplication Image, product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.

GM Bond Size Avilable in Market :  25/-KG.

Shelf Life Time :  Use Best Before 6Month From Manufacturing of Gypsum Plaster

Coverage :

Application Thickness -12MM

GOLDMAX 1 COAT GYPSUM PLASTER – 20 Sq-ft/25 KG. BAG

Standard Compliance

IS 2547 (Part I)-1976 for chemical characteristics & physical characteristics

APPLICATION AND STORAGE & HANDLING

GOLDMAX 1 COAT GYPSUM PLASTER is supplied both in 25Kg bags. The dimensions of the bag ensure that a well-filled appearance is presented when filled and the bags can be stacked on a pallet in a stable and well-stacked array. Bags should be stored dry, as absorption of water shortens the setting time, causes set lumps to form in the bags and may reduce the strength of the set plasterwork. No hooks or any sharp tools should be used to carry bags from one location to another.

GOLDMAX GYPSUM : Background Preparation

All Are Surfaces should be reasonably dry, clean and protected from the weather, and suitable for the chosen specification. In addition, before plastering concrete backgrounds, ensure that any mould oil or other agents present are removed from the surface. No-fines concrete does not require wetting prior to plastering. Plaster should not be applied onto a ‘green’ background or when any free water is visible. Clean water should be applied 30min minutes before plaster application to control the suction. In-situ or pre-cast concrete which are exceptionally smooth or having low suction will require pre-treatment with GOLDMAX INSTANT GYP BOND-IT Agents.

GYPSUM MIXING -

GOLDMAX 1 COAT GYPSUM PLASTER : to mixed with only clean water for preparation. Mixing should be carried out in a clean tray or bucket. Excessive mechanical mixing should be avoided. Tools and water used in mixing must be clean. Contamination from previous mixes can shorten the setting time and in turn reduce the strength of the plaster when set. Water to plaster ratio (1 part of water: 1.20 part of plaster by weight) should be maintained to have good cohesive workable mix. Prepare plaster mix as much as required depending upon the immediate scope of work. Once the mix has begun to set, water addition is not recommended, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion properties and strength.

GYPSUM APPLICATION METHOD GYPSUM

GOLDMAX 1 COAT GYPSUM PLASTER : should be applied with firm pressure, built out to the required thickness, and ruled to an even surface and left as an undercoat to form a key for finish coat. A thin plaster mix is made and applied as a finish coat to provide smooth surface. It can be applied to an average thickness range of 2-15 mm on walls in one coat and up to 5-10 mm on ceilings. For punning S/C plaster surface should be wetted before application to provide firm bonding. After complete drying for usually 1 hours (depends upon thickness and weather conditions) the plain smooth leveled surface is ready for painting.